Nước là sự sống

Silica Remover System - HYDRO-SRC®

 

Silica is one of the most abundant elements on earth. This mineral dissolving in rainwater as it passes through layers of sandstone to form silica acid.
When high silica content water is used in commercial or industrial application especially in heat generating, problem will be encountered with silicate scale that caused costly consequences.

Scale that forms on heating elements and in pipes reduces heat transfer efficiency leading to unnecessary and wasteful fuel usage; one eighth of an inch of scale on a heating element will result in 25% more energy being used. Scale buildup can also caused blockages in pipework and control valve.

 

Silica scale normally formed in boiler as a result of poor OH alkalinity controlled. The high volatility of silica also can cause carry over problem that resulted deposition of silica scale on steam turbine. The safe level of silica allowed in boiler water is subject to the operating pressure of the boiler. The risk of silicate deposition can be minimized via the process of eliminating silica from the boiler feed water by installing the Silica Remover System.

 

The Hydro-SRC® series offered an economical alternative to eliminate silica comparable to conventional deionizer or reverse osmosis system. The high silica affinity resin employed in the system can effectively removed silica via ion exchange process. The exhausted resin can then reactivated through regeneration process. These systems are available in a versatile range of outputs from 1.0 m3/hr to 50 m3/hr. 

 

Features

Applications

  • Designed for cost-effectiveness and efficiency in silica removal.
     

  • Skid mounted Packaged Plant.
     

  • Manufactured from quality component and backed by reliable service outlet.
     

  • DOSH approval pressure vessel, reliable valves for easy operation.

  • Pre and post treatment programs to ensure optimum result after installing the system.
     

  • Duplex configuration available for continuos uninterrupted water supply
     

  • Regenerant available ex-stock. 
     

  • Silica test kid for water monitoring.

 

How to select Silica Remover System

 

To select the Silica Remover unit bested to meet your requirement, you need to establish the following details: 

  1. the maximum flow of treated water required per hour, taking into account peak demands.

  2. the total volume of treated water required per day ( 24 hours period ).

  3. the total anion and silica load of raw water supply.

  4. whether regeneration must take place at a predetermined time of low/zero demand.

The table below are intended to assist you in selecting a SRC unit based on our standard sizing.
Please contact us if you need more data or assistance in sizing unit.

 

Technical Data for Silica Remover System

 

  Silica Remover

 Flowrate

Working pressure

Capacity

Valve & Piping

Space requirement

Work

Models

Norm.

Max.

Min.

Max.

Min.

Max.

Inlet

Outlet

Width

Depth

Height

Wght

Timer

Meter

m3 /hr

m3 /hr

kPa

kPa

kg/ CaCO3

kg/ CaCO3

mm

mm

mm

mm

mm

Kg

SR200T

N/A

0.5

1.0

250

700

0.8

1.0

25

25

900

660

1200

100

SR250T

N/A

1.0

1.5

250

700

1.4

1.9

25

25

1000

660

1600

150

SR300T

N/A

1.7

2.5

250

700

1.7

2.3

25

25

1000

660

1600

190

SR325T

N/A

2.5

3.5

250

700

2.2

2.9

25

25

1000

660

1600

210

SR400T

SR400M

5.0

7.0

250

700

3.5

4.6

40

40

1100

800

2000

350

SR500T

SR500M

7.5

10.0

250

700

6.3

8.4

40

40

1200

950

2000

700

SR600T

SR600M

10

15.0

250

700

10.3

13.7

40

40

1400

1100

2000

900

SR750T

SR750M

12.0

18.0

250

700

17.1

22.8

50

50

1900

1400

2100

1650

SR900T

SR900M

15.0

22.0

250

700

24.2

32.3

50

50

2100

1400

2100

2070

SR1100T

SR1100M

20.0

30.0

250

700

45.0

60.0

80

80

2500

1400

2150

3260

SR1200T

SR1200M

30.0

45.0

250

700

57.0

76.0

80

80

2900

1540

2300

3680

SR1350T

SR1350M

40.0

60.0

250

700

74.1

98.8

100

100

3300

1750

2500

4140

SR1500T

SR1500M

50.0

75.0

250

700

88.4

117.8

150

150

3500

1850

2500

5840

 

 Specification

 Client to provide :

Vessel

FRP or mild steel construction internal with and epoxy paint and externally with a standard paint finish.

Power supply for automatic models 240 VAC 50 Hz

Pipework

Internal & external pipework fabricated from G.I. or P.V.C.

Drainage for backwash flow

Controller

Individual / multi-port valve with Timer or Water-Meter controlled.

Raw water, treated water and drain pipework to and from the unit

Resin

High capacity silica removal resin

Booster / pressure reducing system if pressure not within the range